Celcon M90
Celcon Polyoxymethylene Copolymer Grade M90 is a medium viscosity polymer that offers the best performance in general injection molding and extrusion of thin-walled tubes and thin gauge films. This grade provides overall excellent performance in many applications.
- Type: POM (Polyoxymethylene/Delrin)
- Color: Natural
Bayblend FR 110
Bayblend FF110 resin is a highly flowable flame-retardant Makrolon polycarbonate and acrylonitrile butadiene styrene (ABS) resin blend. The flame retardant additives of this grade do not contain antimony/bromine/chlorine. Bayblend FR110 features excellent weld strength, high heat resistance and high impact strength. The resin is supplied in granular form and is suitable for injection molding applications. It is naturally opaque and custom colors and special visual effects are available.
- Type: ABS/PC
- Color: Black
- Flame retardant grade: 5VA
Crastin S600F20
The Crastin S600F20 is a PBT engineering plastic reinforced by 20% glass fiber. It is renowned for its excellent strength, rigidity, heat resistance, flame retardancy and dimensional stability, and is widely used in electronic, electrical and automotive components where high performance and reliability are required.
- Type: PBT
- Color: Black
- Flame retardant grade: HB
Cycolac MG47
Cycolac MG47 is a classic general-purpose ABS resin with balanced performance, friendly processing, and excellent surface quality. It is one of the preferred materials in many industries when good toughness, attractive surface finish, and cost-effectiveness are required.
- Type: ABS
- Color: Black
- Flame retardant grade: HB
Cycoloy C1200HF
Cycoloy C1200HF is a high-performance engineering plastic specially designed to meet environmental and safety regulations. It achieves a high flame retardant grade through a halogen-free formula, while also possessing excellent fluidity, heat resistance, and comprehensive mechanical properties. It is an ideal choice for manufacturing thin-walled, complex electronic and electrical enclosures.
- Type: ABS/PC
- Color: Black
- Flame retardant grade: HB
Delrin 500P
Delrin 500P is a “benchmark-level” homopolymer polyoxymethylene with comprehensive and balanced performance. It represents the classic performance combination of POM materials and is one of the preferred materials for replacing metals, achieving lightweight design, fatigue resistance, and low friction. For applications that are new to POM or require meeting a wide range of design requirements, 500P is usually a reliable and error-free choice.
- Type: POM (Polyoxymethylene/Delrin)
- Color: Black
- Flame retardant grade: HB
Lustran 248
Lustran 248 is a high-gloss, medium impact-resistant grade of ABS. This general-purpose injection molding grade material has a good balance of physical properties. It also complies with FDA Regulation 21 CFR 181.32 and is suitable for certain color repeat-use food contact applications.
- Type: ABS
- Color: White
- Flame retardant grade: HB
Lustran 348
Lustran 348 is an injection molding grade ABS with moderate impact resistance and high glossiness. Its features include: healthcare certification, high gloss, moderate impact strength, FDA-modified ISO 10993-1 requirements, USP 23 VI test requirements, UL classification 94HB. Common applications include: intravenous (IV) system components, surgical instruments, diagnostic test kits, UL classification 94HB.
- Type: ABS
- Color: Natural color
- Flame retardant grade: HB
Makrolon 2258
MVR (300°C/1.2kg) 14c cm³/10 minutes; Medical equipment; Suitable for ETO and 121° steam sterilization; Biocompatibility according to many ISO 10993-1 test requirements; Medium viscosity; Easy demolding; Injection molding – Melt temperature 280 – 320°C; Available in two colors: transparent and opaque
- Type: PC
- Color: Transparent
- Flame retardant grade: V-2
Makrolon 2405
Makrolon 2405 is a “benchmark-level” general-purpose polycarbonate with comprehensive performance and wide application range. It offers the best balance among transparency, impact strength and heat resistance, making it a reliable starting point for product design and material selection in numerous industries. For requirements such as higher fluidity (for thin-walled products), higher heat resistance, reinforcement or flame retardant modification, Covestro provides a series of derivatives based on this base grade.
- Type: PC
- Color: Black
- Flame retardant grade: V-2
Noryl 731S
Noryl 731S resin is a non-reinforced mixture of polyphenylene (PPE) and polystyrene (PS). This injection molding resin complies with FC EU, FDA food contact standards, and has NSF/ANSI 61, ACS, WRAS, and KTW-WBGL selected color and manufacturing location lists. Noryl 73 1S resin has excellent surface appearance, high ductility, low hygroscopicity, dimensional and hydrolytic stability. Noryl 73 1S resin is an excellent candidate material for various water management applications (such as valves, filter components, and internal parts of water meters).
- Type: PPE/PS
- Color: Black
Noryl 731F-701S
Noryl® modified PPO is a robust engineering plastic with excellent mechanical, thermal and electrical properties. Its low hygroscopicity and low thermal expansion make Noryl one of the most dimensionally stable thermoplastic plastics currently available. Noryl is widely used in electrical enclosures and structural components because of its excellent insulation properties, flame retardancy, and dimensional stability over a wide operating temperature range.
- Type: PPE/PS
- Color: Black
- Flame retardant grade: HB
Texin 245D
Texin 245D resin is an aromatic polyester-based thermoplastic polyurethane with a Shore hardness of approximately 43D. It can be processed by injection molding; the extrusion process is not recommended.
- Type: TPU
- Color: Natural color